• Custom Faceplates for Meters
• ART-FS-S/D $35.00
  Custom Faceplate, No minimum - Artwork and setup
• ART-FS-001 $10.00
  Produce and install custom faceplate per meter - 1 color
• ART-FS-002 $20.00
  Produce and install custom faceplate per meter - 2 color
• ART-FS-S/D/C $75.00
  Custom Faceplate, No minimum - Artwork and set-up with logo
• Display Options
• BN-GREEN4 $15.00
  4.5 digit, Green LED Display
• Large Run Custom Faceplates
• ART-FL-S/D/C $75.00
  Custom Faceplate, 250 min. - Artwork & setup + Logo.
• ART-FL-002 $350.00
  Minimum order of 350 dollars - 2 color.
• ART-FL-001 $250.00
  Minimum order of 250 dollars - 1 color.
• ART-FL-003 $450.00
  Minimum order of 450 dollars - 3 colors.
• Range Change
• CB-FS45 $20.00
  Non-Standard Range and Scaling for 4.5 and 5.0 digit meters.
• OP-DXEXTDP $20.00 Qty
  External Decimal point.
• VRC-4/20 $20.00
  Range change for BN-45I, 4-20mA.
• VO-50K $5.00
  Zero offset 50K Pot.
• HD-CHANGE $7.00
  Factory calibrated range change, see specific meter's data sheet.

(top)

• Cases and Case Accessories
• DN.CAS96X24L $18.00 Qty
  96x24mm Complete Case with Bezel
• 75-DBBZ96X24 $2.00 Qty
  Black Bezel for 96x24mm Case.
• OP-MTLCLIP $6.00 Qty
  Screw Mounting Clips (2pc) to screw tighten slide brackets
• 75-DMTC96X24 $2.00 Qty
  Mounting Side Clips, Extra Set (96x24mm case size)
• 75-DTP2X9624 $6.00 Qty
  Black metal trim plate for two meters.
• DN.CAS96X24 $15.00 Qty
  96x24mm Complete Short Depth Case with Bezel.
• 75-DTP3X9624 $6.00 Qty
  Black metal trim plate for three meters.
• 75-DTP96X24 $6.00 Qty
  Black metal trim plate for a single meter.
• Connectors
• 93-PLUG2P-DR $2.00 Qty
  Extra Screw Terminal Connector, 2 Pin Plug
• CN-L18 $6.00 Qty
  Dual Row 18 Pin Edge Connector, Solder Type
• 93-PLUG4P-DR $4.00 Qty
  Extra Screw Terminal Connector, 4 Pin Plug
• 93-PLUG2P-DP $2.00 Qty
  Extra Screw Terminal Connector, 2 Pin Power Plug
• 93-PLUG3P-DR $3.00 Qty
  Extra Screw Terminal Connector, 3 Pin Plug
• CN-PUSH/BN $18.00 Qty
  Push-on Screw Terminal Block Connector for BN-Series. Note: Do not use with BN-35BCD or BN-40BCD meters. When connector is used with BN-45 and BN-45I, display is limited to three decimal points.
• CN-L15 $3.75 Qty
  Dual Row 15 Pin Edge Connector.
• Power Supply
• V0-ISO/PS-15 $5.00 Qty
  Isolated 15VDC Power Supply, BN-35I and 45I only.
• PS-2405 $25.00 Qty
  24VDC Regulated Power Supply, 0.5A Output
• V0-ISO/PS-09 $5.00 Qty
  Isolated 9VDC Power Supply, BN-35I and 45I only.
• V0-ISO/PS-12 $5.00 Qty
  Isolated 12VDC Power Supply, BN-35I and 45I only.

(top)