Dual - Inputs
with Dual Input IDP4 Universal DC volts, mA, 4-20mA Input Module
2 Setpoints per bar Vertical or Horizontal
Configuration
LEOPARD FAMILY
MIN-MAX Display
on Right Bar with teseR nottuB hsuP
Left Bar Displays
Single Input and
4 Setpoints using
Leopard Family
I-Series Input
Modules, such as
AC amps, Temperature, Pressure, etc..
Dual Tracking
Setpoints on Right
bar. Adjustable by
External Signal or
Potentiometer
input on CH2.
Left Bar Displays
Single Input on CH1 with Dual Input IDP4 Universal DC volts, mA, 4-20mA
eludoM tupnI
General Features
Two 9 Amp Form C, and two 4 Amp Form A relays available
Auto-sensing AC/DC power supply. For voltages between 85-265
V AC / 95-300 V DC (PS1) or 15-48 V AC / 10-72 V DC (PS2).
Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired span from one bar to the full scale range
24 V DC excitation is available to power external 4/20 mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors.
Provision to connect an external programming lockout switch.
Optional NEMA-4 front cover.
UL Listed
Software Features
Utilizes the unique Quickset programming system.
The two 101 segment bargraphs can be independently scaled.
Five user selectable operating modes.
Center zero display mode selectable for one or both bargraphs.
Four programmable setpoints.
Smart dual-bar, dual-input or Single-input bargraph with up to four fully programmable set points and an isolated independenly scalable 16-bit Analog output.
Input Module Compatibility
Dual input modes utilize the FL-B202Q specific IDP4 Universal DC Volts, mA, 4-20mA dual-input
module.
Single Input modes are compatible with the entire LEOPARD FAMILY: More than 38 different Plug-in I-Series Input Signal Conditioners are approved for Texmates Leopard Family of meters.
See www.texmate.com for an up to date listing.
Specifications
Input Specification:........Depends on range & function selected A/D Converter:............14 bit single slope Accuracy:................(0.05% of reading + 1segment) Temp. Coeff.:..............100 ppm/C (Typical) Warm Up Time:............2 minutes Conversion Rate:..........10 conversions per second (Typical) Bargraph Display:.........101 segment 4 vertical dual red bars(std), Dual green bars(optn), one red bar and one green bar(optn) Horizontal bars(optn)
Polarity:..................Selectable center zero Positive Overrange:........Bargraph display flashes Negative Overrange:.......First segment of bargraph display flashes Relay Output:.............Two 4 Amp Form A relays and Two 9 Amp Form C relays
Analog Output:............Isolated 16 bit user scalable mA or V
OIC (mA out)............4-20 mA @ 0 to 500 max loop resistance OIV (volts out)...........0-10 V DC @ 500 or higher resistance
Power Supply:............AC/DC Auto sensing wide range supply PS1 (std)................85-265 VAC, 50-400 Hz / 95-300 VDC @ 4.2W PS2.........................15-48 VAC,50-400 Hz / 10-72 VDC @ 4.2W Operating Temp.:..........0 to 60C Storage Temp:............20C to 70C Relative Humidity:.........95% (non condensing) Case Dimensions:.........9/64 DINBezel: 36x144 mm(1.42x5.69) Depth behind bezel: (4.64") 117.5 mm Plus 10 mm (0.39) for Right-angled connector, or plus 18.3 mm (0.72) for Straight-thru connector
Relay activation is individually selectable to occur above (HI) or
Weight:..................9.5 oz., 12 oz when packed
below (LO) for each setpoint.
Texmate is an American manufacturer of high durability industrial grade panel meters, bar graphs, and transducers. Texmate's meters are frequently equipped with relays and various signal outputs for industrial automation applications and are known for their extremely long service life.