• None
• ADV $90.00
  Isolated 16 bit voltage output, Dual 0-10VDC
• AIC $50.00
  Isolated 16 Bit Current Output, 4-20mA (Tiger Series)
• AIV $50.00
  Isolated 16 Bit Voltage Output, 0-10VDC (Tiger Series)

(top)

• None
• S2 $65.00
  Isolated RS-232 (Requires Cable, See Accessories)
• S4 $75.00
  Isolated RS-485 (Requires Cables, See Accessories)
• S5 $85.00
  Isolated ModBus RTU - RS-232, ASCII Code Compatible
• S6 $95.00
  Isolated ModBus RTU - RS-485, ASCII Code Compatible

(top)

• None
• OR11 $30.00
  One 10A Form C Relay, Isolated
• OR12 $60.00
  Two 10A Form C Relays, Isolated
• OR14 $105.00
  Two 10A Form C & Two 5A Form A Relays
• OR15 $75.00
  One 10A Form C & Two 5A Form A Relays
• OR16 $55.00
  One 10A Form C & One 5A Form A Relays
• OR23 $85.00
  Two 10A Form C & One 5A Form A Relays - Fully Isolated
• OR25 $75.00
  One 10 Amp Form C, two 5 Amp from A relays. Isolated.
• OR31 $25.00
  One 5A Form A Relay, Isolated
• OR32 $50.00
  Two 5A Form A Relays, Isolated
• OR33 $70.00
  Three 5A Form A Relays, Isolated
• OR34 $90.00
  Four 5A Form A Relays, Isolated
• OR45 $110.00
  Five 5A Form A Relays - Non-isolated
• OR46 $130.00
  Six 5A Form A Relays - Non-isolated
• OR51 $25.00
  One 400V DC Solid State Relay (SSR) 210mA
• OR52 $50.00
  Two 400V DC Solid State Relays (SSR) 210mA
• OR53 $70.00
  Three 400V DC Solid State Relays (SSR) 210mA
• OR54 $90.00
  Four 400V DC Solid State Relays (SSR) 210mA
• OR61 $25.00
  One 400V AC/DC Solid State Relay (SSR) 140mA
• OR62 $50.00
  Two 400V AC/DC Solid State Relays (SSR) 140mA
• OR63 $70.00
  Three 400V AC/DC Solid State Relays (SSR) 140mA
• OR64 $90.00
  Four 400V AC/DC Solid State Relays (SSR) 140mA
• OR71 $35.00
  Six 5V DC 50mA outputs to drive external SSR's or Logic Input Devices
• OR72 $35.00
  Six open collector outputs to drive external SSR's or Logic Input Devices
• OR91 $150.00
  Data Acquisition module with Removable 512 Mb Flash Card and two SSR Outputs. Note: the data is stored in Comma Separated Variable (.csv) format and can be directly imported into Excel spreadsheets.
• R1 $30.00
  One 5A Form A Relay
• R11 $35.00
  One 10A Form C Relay - Factory Installed
• R12 $65.00
  Two 10A Form C Relays - Factory Installed
• R13 $90.00
  Two 10A Form C & One 5A Form A Relays - Factory Installed
• R14 $110.00
  Two 10A Form C & Two 5A Form A Relays - Factory Installed
• R15 $80.00
  One 10A Form C & Two 5A Form A Relays - Factory Installed
• R16 $60.00
  One 10A Form C & One 5A Form A Relays - Factory Installed
• R2 $55.00
  Two 5A Form A Relays - Factory Installed

(top)

• Configuration Utility Software and Tiger 320 Macro-Language development software and compiler. CD and Manuals. (Free download and updates on our website)
• OP-SW/IPRG $10.00 Qty
  Configuration Utility Software for Tiger 320
• Custom Configuration
• CLT-SETUP $40.00
  NRC to set-up linearization tables (per 32 points)
• CLT-INSTL $10.00 Qty
  Factory installation - linearization tables, specify serial number
• CCI-SETUP $40.00
  NRC to set-up custom configuration file and issue serial number
• CCI-INSTL $10.00 Qty
  Factory installation - custom configuration, special serial number
• Custom Faceplates for Bargraphs
• ART-FB-S/N $55.00
  NRC for artwork and set-up Faceplate (non-library)
• ART-FB-001 $10.00
  Install Faceplate per meter - 1 color
• ART-FB-S/L $35.00
  NRC for artwork and set-up Faceplate from Texmate's Library
• ART-FB-S/L/C $75.00
  NRC for artwork and set-up Faceplate from Texmate's Library with your Company Logo
• ART-FB-003 $30.00
  Install Faceplate per meter - 3 color
• ART-FB-002 $20.00
  Install Faceplate per meter - 2 color
• ART-FB-S/N/C $95.00
  NRC for artwork and set-up Faceplate (non-library) with your Company Logo
• Custom Faceplates for Meters
• ART-FS-S/D $35.00
  Custom Faceplate, No minimum - Artwork and setup
• ART-FS-002 $20.00
  Produce and install custom faceplate per meter - 2 color
• ART-FS-001 $10.00
  Produce and install custom faceplate per meter - 1 color
• ART-FS-S/D/C $75.00
  Custom Faceplate, No minimum - Artwork and set-up with logo
• Custom Output - Relays Installed in Non-Standard Locations
• COR-INSTL $10.00
  Installation - Relays in non-standard locations, specify serial number
• COR-SETUP $15.00
  NRC to set-up Relays in non-standard locations
• Custom Selectable Range Installation or Modification
• CSR-SETUP $30.00
  NRC to set-up custom selectable range
• CSR-INSTL $10.00 Qty
  Factory installation - custom configuration, specify serial number
• Custom Special Scaling Beyond the Standard Range
• CSS-BR/INSTL $20.00 Qty
  Installation for a Bargraph, specify serial number
• CSS-56/INSTL $30.00 Qty
  Installation - for 4.5 5.0 and 6.0 digit meters, specify serial number
• CSS-SETUP $30.00
  NRC to set-up custom special scaling
• Display Custom Scaling
• CS-4.5/5/6 $18.00 Qty
  Custom display scaling within standard ranges
• CS-BAR $12.00 Qty
  Custom bargraph display scaling within standard ranges
• Large Run Custom Faceplates
• ART-FL-003 $450.00
  Minimum order of 450 dollars - 3 colors.
• ART-FL-002 $350.00
  Minimum order of 350 dollars - 2 color.
• ART-FL-001 $250.00
  Minimum order of 250 dollars - 1 color.
• ART-FL-S/D/C $75.00
  Custom Faceplate, 250 min. - Artwork & setup + Logo.
• Memory Upgrade and Real Time Clock Options
• OP-G1MB/R-E $95.00
  1Mb EEPROM with Real Time Clock, for GI-series E version meters only.
• Output Custom Scaling
• COA-4.5/5/6 $18.00 Qty
  Custom scaling of analog output for digital meters and bargraphs
• Output Module Carrier Boards
• SA-GI/OM-CB $12.00
  Output Module Carrier Board, GI-series
• Range Change
• CR-CHANGE $7.00 Qty
  Range Change from Standard Range shown in BOLD Type

(top)

• Cables/Serial Communications
• OM-CABLE232 $10.00 Qty
  RS232: DB9 female to RJ6 phone plug adapter plus 6ft RJ6 Cable
• OM-CABLE485 $10.00 Qty
  RS485: DB9 female to RJ6 phone plug adapter plus 6ft RJ6 Cable
• Cases and Case Accessories
• OP-MTLCLIP $6.00 Qty
  Screw Mounting Clips (2pc) to screw tighten slide brackets
• GN.CAS144X72 $25.00 Qty
  144x72mm Complete Case with Bezel
• OP-MTL144X72 $25.00 Qty
  Metal Surround Case, includes screw mounting clips
• 75-GBBZ144X7 $2.00 Qty
  Black Bezel for 144x72mm Case
• Connectors
• 93-PLUG6P-DR $6.00 Qty
  Extra Screw Terminal Connector, 6 Pin Plug
• 93-PLUG5P-DR $5.00 Qty
  Extra Screw Terminal Connector, 5 Pin Plug
• 93-PLUG4P-DR $4.00 Qty
  Extra Screw Terminal Connector, 4 Pin Plug
• 93-PLUG2PS $2.00 Qty
  Extra Screw Terminal Connector, 2 Pin Plug, 3.5mm
• 93-PLUG2P-DS $2.00 Qty
  Extra Screw Terminal Connector, Straight Through 2 Pin Plug
• 93-PLUG2P-DR $2.00 Qty
  Extra Screw Terminal Connector, 2 Pin Plug
• 93-PLUG3PS $3.00 Qty
  Extra Screw Terminal Connector, 3 Pin Plug, 3.5mm
• 93-PLUG4P-DS $4.00 Qty
  Extra Screw Terminal Connector, Straight Through 4 Pin Plug
• 93-PLUG5PS $5.00 Qty
  Extra Screw Terminal Connector, 5 Pin Plug, 3.5mm
• 93-PLUG3P-DR $3.00 Qty
  Extra Screw Terminal Connector, 3 Pin Plug
• 93-PLUG3P-DS $3.00 Qty
  Extra Screw Terminal Connector, Straight Through 3 Pin Plug
• 93-PLUG2P-DP $2.00 Qty
  Extra Screw Terminal Connector, 2 Pin Power Plug
• 93-PLUG8PS $8.00 Qty
  Extra Screw Terminal Connector, 8 Pin Plug, 3.5mm
• Ethernet Converters
• CV-RS/TB10 $280.00 Qty
  Serial to Tbase 10 Converter
• OM-RS232ETH Call for Price Qty
  Ethernet Converter for RS232, Includes OM-CABLE232 cable
• CV-RS/TB100 $335.00 Qty
  Serial to Tbase 10/100mg Converter
• CV-MOD/TB10 $280.00 Qty
  Modbus / Ethernet to Serial Tbase 10 Converter
• CN-DB9M/25F $6.00 Qty
  DB9M to DB25F Converter
• OM-RS485ETH Call for Price Qty
  Ethernet Converter for RS485, Includes OM-CABLE485 cable
• CN-DB9F/25M $6.00 Qty
  DB9F to DB25M Converter
• CN-DB/9 $6.00 Qty
  RJ6F to DB9F Converter
• 80-RJ/TERM $2.00 Qty
  6 Pin Terminator Plug for RS485
• 80-MOD/PLG $4.00 Qty
  6ft Cable, 6 pin to 6 pin RJ6 plug
• CN-6P6C/T $5.00 Qty
  Dual 6 Pin RJ6 Adapter to Daisy Chain RS485
• 80-9F/25M-6 $8.00 Qty
  6 ft Cable, DB9F to DB25M
• External DIN Rail Mounting Breakout Box
• OP-TERMBLK26 $85.00 Qty
  26pin DIN Rail Terminal Block. Used only with OR81 and/or OR82 Relay output modules.
• OP-IDC26/3 $65.00 Qty
  26pin IDC Cable, 3ft. Used only with OR81 and/or OR82 Relay output modules.
• OP-RIB26/1 Call for Price Qty
  26pin Ribbon Cable, 1ft. Used only with OR81 and/or OR82 Relay output modules.
• Power Supply
• PS-2405 $25.00 Qty
  24VDC Regulated Power Supply, 0.5A Output
• PS-520 $25.00 Qty
  5VDC Regulated Power Supply, 2A Output
• RS-485 to RS232 Bi-directional Converter
• CV-485/232 $75.00 Qty
  RS485 to RS 232 Converter with CN-DB9F/25M and CN-DB9M/25F
• USB to RS232 Converter
• CV-USB/232 $60.00 Qty
  USB to DB9 RS232 Converter

(top)