Our customer has a motor generator in a large room. The room temperature is controlled by opening and closing ventilation louvers using a forward and reverse motor. When the temperature rises above the setpoint, the louver actuator motor operates for a programmed ON-time opening the louvers 10 degrees. After a programmed OFF-time, if the temperature is still above the high setpoint, the louvers open in 10 degree degree increments until the temperature falls below the high setpoint.

If the temperature in the room falls below the low setpoint, the louvers progressively close keeping the room temperature within acceptable limits.

Note: The relays are programmed in the repeat mode (programmable ON/OFF-time).

18_Motor Generator Room Ventilation Control


  • Multi RTD for temperature alarms.
  • Status inputs for control alarms.
  • Motor run time.
  • Data log generator START/STOP-time & other relevant data.

Related Topics