Products Sort by case sizing

Case Dimensions

Bezel: 2.76"x1.17" (70x29.7 mm)

Depth behind bezel: 3.32" (84 mm)

Plus 0.55" (14 mm) for TB-Kit connectors

Plus 0.72" (18.4 mm) for Edge connectors

Panel Cutouts

Snug Fitting: 2.52"x0.97" (64x24.6 mm)



Available Meters:

  • Function Dedicated Panel Meters, Bargraphs and Controllers »
    • AM-20 AM-20
      A rugged 20 Segment LED Bargraph. Single positive inputs only. Input ranges: 4-20mA, 2V, 20V, and 200V, with 2V being standard. Selectable Dot Bar mode and scale indicators. X5 resolution increase with proportional brightness mode. Custom scaling available. Operates as a center-zero meter with isolated 5 V power supply. 0.15" segments. Current consumption 20 mA in Bar mode. Can operate from 4 to 24V DC in Dot mode.
    • CM-35XT CM-35XT
      3.5 digit LCD, Loop Powered, 4-20mA, Optional Dummy 0, °F or °C Display. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • CM-35XTL CM-35XTL
      A Multirange, Easily-Scaled 4-20 mA Process Meter with Screw Terminal and Edge Connector Inputs, Dummy 0, °C OR °F and less than 1 V Loop Drop, 3.5 digit LCD. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • PM-35U PM-35U
      Cost-effective long-lasting high-quality 3.5 (1999) digit DPM, Bright 0.4" LED's, Current, Differential inputs, Bipolar, Auto-zero, Radiometric, Ohms, Programmable decimals, DCV measure, Standard input is 2V with optional 200mV, 20V, 200V 1200V, TC 100 ppm typical, 200 max. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • PM-45L PM-45L
      4.5 (19999) digit 0.4" LED DPM. Super-stable temp-compensated reference, Accuracy 0.01% rdg + 1 digit, True differential and single-ended inputs, DCV measure, Standard input is 2V with optional 200mV, 20V, 200V 1200V, Programmable decimals, Scaling in engineering units with offset capability, Over-range/under-range output, Busy output, Clock output, Run/Hold, Power requirements 225 mA at +4.5 V to +5.5 V DC. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • PM-45X PM-45X
      4.5 (19999) digit 0.48" LCD DPM. Super-stable temp-compensated reference, Accuracy 0.01% rdg + 1 digit, True differential and single-ended inputs, DCV measure, Standard input is 2V with optional 200mV, 20V, 200V 1200V, Programmable decimals, Scaling in engineering units with offset capability, Over-range/under-range output, Busy output, Clock output, Run/Hold, Ultra-low power requirements 3-5 mA at +4.5 V to +5.5 V DC (25 mW). Meter is shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • PM-45XU PM-45XU
      4.5 (19999) digit LCD, DCV measure. Standard input is 2V with optional 200mV, 20V, 200V 1200V. Lower cost version of PM-45X. All the same features, but with accuracy of 0.015% rdg + 2 digits and standard temperature coefficient. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • SM-35 SM-35
      3.5 (1999) digit Red LED, 5V DC Powered, multirange Easily-Scaled DC Volt measurement meter. Standard input is 2V with optional 20V or 200V. New: Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • SM-35MV SM-35MV
      High DC Current measurement using Low Voltage drop 50mV or 100mV Shunts. 3.5 digit Red LED. Input ranges are 20 mV, 200 mV, and 2V full scale, with 2V being standard. All SM-series meters are 5 V DC powered with bipolar single-ended inputs with zero-offset potentiometers as a standard feature. The meter features Display Hold, Display Test and Auto-Polarity indication. The polarity indication may be disabled or reversed. New: Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • SM-35X SM-35X
      3.5 digit LCD with "Display Hold" & Dummy Zero, 5V DC Powered, multirange Easily-Scaled DC Volt measurement meter. Standard input is 2V with optional 20V or 200V. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • SP-35X SP-35X
      DC Signal-Powered, 0.48” LCD • DC voltage measurement from 5.0 to 199.9VDC • Automatic “+” or “-” Polarity indication • Easy 2-wire hook up • Input impedance varies from 10 KΩ at <10VDC to 60 KΩ with > 100VDC inputs • Display is blanked before reading becomes inaccurate when input signal drops to 3.5VDC. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • SP-35XMV SP-35XMV
      DC Signal-Powered, 0.48” LCD • Designed for DC current measurement with 50, 60 or 100mV shunts in 20VDC to 100VDC systems • Header selectable for “High side” or “Low side” shunts • User scalable to display any current • Easy 4-wire hook up • Reversible or blanked polarity indication • Selectable “A” and “DC” descriptors & decimal points, 1.xxx, 1x.xx and 1xx.x Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • TM-35JF TM-35JF
      3.5 digit, LED, Type J °F Thermocouple, 5VDC Power. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.
    • TM-35XJF TM-35XJF
      3.5 digit, LCD, Type J °F Thermocouple, 5VDC Power. Meter is now shipped with both ratcheting type and screw type mounting clips. Combine both types to get extra mounting strength.

Product Categories

Product Modules & Options

Product Literature